Air Handlers
Compressors (Packages and Bare)
RXF Screw Compressor Package
RWF II Screw Compressor Package
Package comes with FRICK XJF Rotary Screw Compressor, continuous capacity control precisely matches load requirements, Quantum HD Controller, Operational Variable Speed Drive, 5+7 rotor design for the strongest and most efficient operation, all components are mounted and wired in package.
RWF II Screw Compressor Package
RWF II Screw Compressor Package
Package includes Frick SGC Rotary Screw Compressor, continuous capacity control precisely matches load requirements, Quantum HD Controller, Operational Variable Speed Drive, 4+6 rotor design for the strongest and most efficient operation, all components are mounted and wired in package.
HPS Screw Compressor Package
Package includes Frick HPS Rotary Screw Compressor, continuous capacity control precisely matches load requirements, Quantum HD Controller, Variable Speed Drive, 4+6 rotor design, variable volume ratio, Overload Protection, all components are mounted and wired in package.
RSH Semi-Hermetic Compressor Package
Package includes Frick SH Series Rotary Screw Compressor, Quantum HD Controller, continuous capacity control precisely matches load requirements, Variable Speed Drive, 5+7 rotor design, all components are mounted and wired in package.
HPS Series
38 models ranging from 71 to 5067 FM, Stepless Capacity Control, Antifriction Bearings, Oil Injection Lubrication and Cooling, Wide variety of Drive and Motor Arrangements, Internal Oil Passages, Life expectancy over 100,000 hours, Made in the USA.
SGC / SGX Series
38 models ranging from 71 CFM to 5067 CFM, Stepless Capacity Control, Antifriction Bearings, Oil Injection Lubrication and Cooling, Wide variety of Drive and Motor Arrangements, Internal Oil Passages, Made in the USA.
XJ Series
Ton Ratings from 51 to 211, Stepless Capacity Control, Antifriction Bearings, Oil Injection Lubrication and Cooling, Wide variety of Drive and Motor Arrangements, Internal Oil Passages, Made in the USA.
SH Series
Compressor for the RSH Semi-Hermetic Compressor Package, Wide Variety of Drive and Motor Arrangements, Made in the USA
Need Customized?
Need Customized?
Need Customized?
ARESCO can order customized compressors that are not mentioned in the compressor products mentioned above with your required ton ratings and horsepower ratings. Contact us to get your compressor
Condensers
FACS Adiabatic Series
IDCF / IDC3 Induced Draft Series
IDSC2 Stainless Steel Series
Up to 90% water savings based on ambient temperatures and system design. 5-350 tons per unit, 3,800 to 16,500 lbs operating weight, Stainless Steel Tubes/Aluminum Fins Standard, EC Motors/Fans Provide Very Low Energy Consumption, Plume-free, Easily Removable Pads, and Easy Removable Pads, and Easy Cleaning Access, "Maintenance-free" EC Motors, Quick and Easy Installation.
IDSC2 Stainless Steel Series
IDCF / IDC3 Induced Draft Series
IDSC2 Stainless Steel Series
More than 45-unit variants available, 200-625 tons per unit, approximately 50% less operating weight, ASHRAE 64 Certified facility, Self-passivating 304L stainless steel frame, significantly reduces annual operating costs and up to 70% savings, Effective life span that doubles conventional evaporative condensers, Easier installation, Highly efficient direct-driven fan options,
IDCF / IDC3 Induced Draft Series
IDCF / IDC3 Induced Draft Series
IDCF / IDC3 Induced Draft Series
IDC3 has a capacity range of 41 to 2,734 tons, IDCF ranges from 45 to 2,810 tons, Operating weights range on both from 3,800 to 165,700 lbs, VFD's for independent fan and capacity control, G-235 galvanized steel for long-lasting durability and corrosion protection, totally enclosed motors for reliable operation
XLP3b Forced Draft Series
IDCF / IDC3 Induced Draft Series
Capacity ranges from 10 to 36 nominal tons, approximately 16% less than similar units because of a smaller standing water volume, TripleGuard Corrosion Protevtion System, Belt-Drive Power Train, Maximized Reliability and Uptime.
ECC Centrifugal Series
Forced draft, energy saving, Superior corrosion protection, Easy assembly, Low profile and sound, Locate indoors or outdoors, HDGAF coil assembly, Premium efficient VFD motors.
ECL Low Profile Centrifugal Series
Low Profile Design, Forced Draft System, Superior Corrosion Protection, Energy Efficiency, Easy Assembly, Low Sound Levels.
Control Products
Engineered Control Solutions System
24-hour virtual refrigeration operator with a strong prioritization of maintaining temperature control, cost savings and energy conservation. Features include Floating Discharge Pressure (Wet-Bulb) Control, Variable Speed Control, Proportional/Integral Modulating Control, Load Shedding, Compressor Sequencing and Virtual 24-Hour Operator.
Quantum HD Unity System Controller (Central or distributed)
The Quantum HD Unity System Controller whether it is central or distributed features are Evaporator Control with 30 zones of control, 4 operating modes from 3 separate temperature inputs. Condenser Control, 16 steps of Condenser Control, 8 VSD fan outputs, dynamic and fixed pressure control. Vessel - 3 vessels, up to 4 pumps on each. Engine Room- Ventilation control
Quantum HD Unity Compressor Controller
The Frick Quantum HD Unity Compressor Controller Unit is the most advanced controller on the market. The display is high-definition and easy-to-read. Accessing any control, calibration or value is easy. Other notable features include compressor sequencing, real time and historical trending and on-board software and hardware-based diagnostics.
Quantum HD Unity Field Retrofit
The Quantum HD Unity Field Retrofit Unit is the easier unit to integrate and retrofit your current controller. Powerful high definition control that extends like of existing equipment. Features include remote (panel to panel) networking, large, intuitive touch-screen interface, free and easy software upgrades and all future software features.
PureOil
PureOil Products
- #3 Oil - Min. Suction Temp. -35 degrees. Available in 5, 55 or 330 Gallons.
- #9 Oil - Min. Suction Temp. -50 degrees. Available in 5, 55 or 60 Gallons.
- #9ST Oil - Min. Suction Temp. -50 degrees. Available in 5 or 55 Gallons.
- #11 Oil - Min. Suction Temp. -80 degrees. Available in 5, 55 or 330 Gallons.
- #11ST Oil - Min. Suction Temp. -70 degrees. Available in 5 or 55 Gallons.
Vessels
Custom Pressure Vessel
Designed and built for years of service, cost savings and are rated for specific temperature/pressure targets. Features include Coolware software that allows custom ratings of the ammonia based on the size of the vessel and nozzle locations. Nozzle connections are sized accordingly to industry standards in ammonia.